The patterned conveyor belt is composed of belt carcass and pattern. Pattern shape and height (depth) may be different because of different conveyed material and gradient of conveyor. The common kinds of profiled conveyor belt are as follows:
| Name | Pattern shape and features | Purpose |
| Herring-bone patterned conveyor belt | There is herring-bone pattern higher than belt on the surface of belt. The profile may be either open-end or closed. Each kind of pattern includes three types such as high, medium and low. | It can convey powdered, granulated and small lump materials at the gradient of no more than 40 degree. It also convey packaging material. |
| Strip patterned conveyor belt | There is cross strip pattern higher than belt on the surface of belt. The pattern is divided into three types such as high, medium and low. Each kind of pattern includes two types such as sparse and dense-type according to the arrangement of intervals | It can convey package material at the gradient of no more than 30 degree or on the horizon. It can replace herring-bone patterned conveyor belt. |
| Granulated patterned conveyor belt | There is granular pattern higher than belt or sinned into belt on the surface of belt caved-in hole also can be made into the shape of square-hole, rhombic and wove-type. | Protruding-granular profile is applied to such material conveyance as soft package or the material needing gripping power (e.g. Paperboard or non-sliding convey). Caved-in hole granulated pattern is applied to the convey of no more than 45 degree. |
| Fan-shaped patterned conveyor belt | There is half-fan-shaped (or quarter of round) pattern on the surface of belt. When the belt is grooved, the patterns joint together into fan-shaped (of half round) which belongs to high-pattern type | It's suitable for conveying powder, granular and lump material at the big gradient of no more than 60 degree. |
The width of patterned conveyor belt that our corporation can provide is no more than 3100mm.
According to the tensile strength of the belt carcass, the patterned conveyor belt includes such model as M, L, H. Their tensile strength are as follows:
| | Conventional-type
(Model M) | Strength-type
(Model L) | High-strength-type
(Model H) |
Tensile strength
N/layer mm | 54.9 | 196 | 294 |
