CANDO: Your Single Source Supplier of Belts & Hoses
CANDO 

Home » CAN-DRIVE™ » Conveyor Belt » Heavy Duty Conveyor Belt » PVC/PVG Solid Woven Conveyor Belt

Solid woven belting

Product Features:

The product consists of solid woven fabric dipped in PVC paste and adding PVC or PVG cover which are combined together by vulcanizing. The belt has good flame resistant and anti-static properties, with high tensile strength in proportion to weight, good integrity and no delimitation, excellent impact and rip resistance. The belt is much suitable to service in the conditions needing fire resistant and antistatic properties as coal mines, power stations, chemical and metallurgy industries.

Note: The following standards are usually applied: DIN22109,AS4606,BS3289,BC158

Classification of solid woven belt
PVC stands for the solid woven belt with PVC cover.

Non pressed PVC type is suitable for applications in dry conditions at a slope angle of no greater than 16 degrees. The belt is non-pressed with cover no more than 0.8mm.

Pressed PVC type, both top and bottom covers are PVC, thickness of each side can be up to 4mm, the belt has much more advantages than non pressed PVC belt on impact resistance, water soaking, with longer service life, higher fastener holding.

Features

  • Low stretch
  • Low maintenance
  • Anti-static
  • Flexible
  • Lightweight
  • Impervious to moisture, acids, oils, gases, sunlight
  • Excellent fastener holding
  • Excellent resistance to tearing, peeling and impact
  • Endless belt splicing
  • Special wear resistant edge design

PVG stands for the solid woven belt with PVG cover (nitrile rubber)

PVG type is covered with covers mainly composed of rubber, which further improves the troughability, resistance to wetness and slip, resistance to low temperature, elongation and wear resistance of the belt. Both top and bottom cover are PVG, the belt can be used to carry materials mixing some water at the slope no more than 20°,elongate life of belt

Characteristics

  • Anti slide caused by wetness good climbing capacity
  • Low-temperature resistant
  • Good elasticity, anti-impact
  • Low elongation at rated load ,suitable for long distance conveying
  • Tear resistant, good flexing capacity
  • Long service life

Technical data


Main physical properties

ItemTensile strength (min) (N/mm)Carcass thickness
(mm)		Carcass weight
(Kg/m2)		minimum tear force
(N)		Elongation at break (min)(%)Cover grade and recommended thickness
(mm)		Belt width
(mm)		Recommended min pulley diameter
(mm)
 WarpWeft      WarpWeftPressed PVCPVG  
680/16802656.58.5109015181.5+1.51.5+1.5500-2200400
800/18003206.99118015181.5+1.51.5+1.5500
1000/110003507.59.7118015182+1.52+1.5630
1250/112503508.511154015182+22+1.5750
1400/11400350911.5154015183+22.5+1.5750
1600/116004509.512.3  15183+22.5+1.5800
1800/118004501013  15183+23+2800
2000/1200045010.513.6  15183+24+21000
2500/1250045012.514.5  15183+25+31200
3100/131004501717  1518    1500
3500/135005002019  1518     

Mechanical properties of cover(DIN22109)

ItemTensile strength
Mpa(min)		Elongation at break 
%(min)		Abrasive wear
mm3(min)
PVG15350200
PVC12.5300200

Home » CAN-DRIVE™ » Conveyor Belt » Heavy Duty Conveyor Belt » PVC/PVG Solid Woven Conveyor Belt